THE DIAMOND BUILDING, OUR SIGNATURE PROJECT

20110601-125623.jpg

31st May 2011 marks a very important date for Arc Flash Corporation (M) Sdn. Bhd, because on this day, Malaysia’s first Platinum Green Building was being launched by our DPM and was published today on the newspapers nationwide on 1st June 2011.
Arc Flash Corporation is proud to be involved in this project which houses Suruhanjaya Tenaga, Malaysian’s Energy Commision located in Precint 2, Putrajaya. The Diamond Building is LEED Platinum Building, the first Malaysian Green Building Index Platinum building and the first certified GBI building or Green Energy Office.

Arc Flash Corporation (M) Sdn Bhd was involved in the project at the Indoor Air Quality (IAQ). We applied our nano titanium dioxide (tio2) in the whole building to help to maintain the best indoor air quality by continuously reducing the VOCs and Formeldehyde level to the lowest at all times.

20110601-010859.jpg

20110601-010918.jpg

20110601-010932.jpg

20110601-010938.jpg

20110601-010949.jpg

20110601-010953.jpg

Our nano tio2 was applied to the whole internal structures of the building, including all the ceilings, walls, floors and also all the fittings and fixtures as well as all the furnitures located in this building.

Besides LOW VOCs and Formaldehyde, upon application of our nano tio2, thus building is also Free from:
1) Molds/Fungus
2) Bacteria and Airborne contaminants
3) Odor

Apart from these benefits, using nano tio2 application on green buildings is cost and time saving too. Experts pointed out in our green building seminar which was held last week, that there are 2 requirements in the green building in improving the indoor air quality. Air Flushing is one method and Air Quality Testing is another.

20110601-015912.jpg

Air Flushing could take a long time and it’s cost consuming because you’ll need very expensive equipments for flush out the air of a whole building. Imagine that a building is due in 3 months and the air flushing has to be done pre-occupied. It’ll easily take up to 20 to 30 days to thoroughly flush out the air of a building of let’s say 7 stories. Therefore if it takes another month to complete the building just for flushing the air, it will be a great lost to the building itself as well as the contractors.
On the other hand, air quality testing can be done during occupancies, but if at the end of a few months time, the indoor air quality is still above the accepted levels in VOCs and Formaldehyde, air flushing is needed to be done. Hence, the extra costs again.
However, during our seminar, experts also pointed out that by using the nano tio2 application, it is the easiest way to maintain the indoor air quality way much below the acceptable levels. This was proven in the air quality monitoring of our Diamond Building over a period of 3 months.

HERE IS THE UNOFFICIAL INDOOR AIR QUALITY RESULTS FOR OUR PROJECT

AIR QUALITY BEFORE APPLICATION

20111006-142655.jpg

notice the VOCs were already low because this building was using low VOCs materials

AIR QUALITY 3 MONTHS AFTER THE APPLICATION

20111006-142743.jpg

notice the VOCs level in some levels goes down to ZERO after 3 months

.

20110601-011936.jpg

It was a great experience with the team in this job

like what you are reading? Click like on ourFacebook for live updates

Advertisements

How SmartCoat technology improves IAQ

There has been researches mentioned that nowadays, even the air inside our buildings is worse that the air outside. This is mainly due to the finishes that we have using on our walls and ceilings (eg, paints and glues used on wall papers), floors (eg, materials used on our carpets), open spaces (eg, use of fragrances), washing materials (fragrances detergents) and etc. All the mentioned materials emits VOCs. Most of these VOCs contains harmful gasses that is dangerous to human Heath over a long time.
These danger can’t be seen and felt. The only way we can detect is either by smelling or using VOC testers.

Besides VOCs, even other micro-organic matters like bacteria, virus, molds/fungus and other allergens that we can’t see will harm to our health over time. How can we know whether or not our home of offices or even our cars are filled with all these harmful microbes? They cannot be seen and felt as well. Again, there are numerous swap test equipments and expertise our there who is able to detect them.

So, what do we do after detection of such harmful matters that we have been living with? We take actions by trying to eliminate them. There are a lot of products that have the ability to minimize such contaminants, but does anyone really know what to use? Do they depend on a physical product like an air purifier? After determining that, do they go for the brands and then comparing prices? When they purchase these products to counter the IAQ problems, do they even check the air quality and cleanness of their surfaces once a while to make sure what they have purchased is useful? If they don’t, what makes them trust the products they are using? What different does that make to using nanoyo?

Nanoyo is a form of liquid which contains nano sized tio2. This liquid is applied onto all surfaces in the interiors of a building. This includes all ceilings, walls, floors and even all the furnitures and fittings within a building. When all these mentioned surfaces are applied with nanoyo, when there is like at presence, the treated surfaces will begin to have an ability to decompose anything that is organic upon contact. Therefore, it is able to oxidize VOCs, molds, odor, bacteria and viruses through a process call photocatalyst reaction.
The purpose of covering all the surfaces in the environment is to make use of every treated surfaces to work against all these harmful microbes. Nano tio2, when applied, can last a long time. It’s lifespan can be as long as 2 to 3 years without any maintenance like plugging it into your power supplies or even changing filters like air purifiers. The invisible coat, when applied onto surfaces, will never change the finishing of the surfaces.

So now, we have another option to consider when we are looking for something to solve our IAQ problem. Nanoyo has been in Malaysia for more than 7 years, applied to many premises such as hospitals, hotels, offices, residentials, karaokes, f&b outlets and etc, helping to solved different problems faced by the patrons here.
To find out more, please visit nanoyo or email us on heng@nanoyo.com.my.

like what you are reading? Click like on ourFacebook for live updates

REHDA PROJECT (Malaysia)

20111111-114854.jpg

It has been a long wait for us to see the project to come to this stage. Finally, it’s our turn to kick start our part. This is going to be a 3 phases project.
We will start off with all the glass panels, followed by the rest of the whole external surfaces when the paint job is done and then finally, it’s our final touch after all the interior jobs are being completed.
This project is expected to be hand over by 31st December 2011. Hopefully all will go well..

20111111-113528.jpg

20111111-113601.jpg

20111111-113642.jpg

Ivan is cleaning the glass panels before he can apply our tio2 on. It’s definitely not an easy job….

20111111-113717.jpg

20111111-113740.jpg

20111111-113802.jpg

all these glasses has to be applied 1 by 1, which takes a lot of time… But with our electrostatic sprayer, no problem…..

20111111-113824.jpg

next round, will be the rest of the exterior building structures… Now, that’s gonna be the toughest part because the nature of the landscape of this building is that, it’s unaccessible by cranes… It’s all on the scarf holdings..

20111111-113913.jpg

Upon Completion of Our Nano Tio2 Application, What will this Building gets?


1. Close to Zero VOCs level

2. Close to Zero Microbial like bacteria, molds/fungus, allergens and even virus level

3. Does not need to install air purifiers

4. Very minimal maintenance for cleaning the external structures because of the nano tio2’s self cleaning effect

5. Effects lasting up to 3 to 5 years, with a 2 years warranty

6. Cost savings in the long run for many aspects

Can this be proven? The building will go through a commissioning process by the green building commissioners before it can be certified. Apart from the professional equipments used by the commissioners to monitor the results, there are also 3rd party labs that can perform indoor air quality sampling tests, swap tests and also VOCs tests.

like what you are reading? Long onto our website for more information of click like at our Facebook fan page for more of our activities and updates…

A NEW IAQ SPECIALIST IS IN TOWN (Malaysia)..

There has been researches mentioned that nowadays, even the air inside our buildings is worse that the air outside. This is mainly due to the finishes that we have using on our walls and ceilings (eg, paints and glues used on wall papers), floors (eg, materials used on our carpets), open spaces (eg, use of fragrances), washing materials (fragrances detergents) and etc. All the mentioned materials emits VOCs. Most of these VOCs contains harmful gasses that is dangerous to human Heath over a long time.
These danger can’t be seen and felt. The only way we can detect is either by smelling or using VOC testers.

Besides VOCs, even other micro-organic matters like bacteria, virus, molds/fungus and other allergens that we can’t see will harm our health over time. How can we know whether or not our home of offices or even our cars are filled with all these harmful microbes? They cannot be seen and felt as well. Again, there are numerous swap test equipments and expertise our there who is able to detect them.

So, what do we do after detection of such harmful matters that we have been living with? We take actions by trying to eliminate them. There are a lot of products that have the ability to minimize such contaminants, but does anyone really know what to use? Do they depend on a physical product like an air purifier? After determining that, do they go for the brands and then comparing prices? When they purchase these products to counter the IAQ problems, do they even check the air quality and cleanness of their surfaces once a while to make sure what they have purchased is useful? If they don’t, what makes them trust the products they are using? What different does that make to using nanoyo?

Nanoyo is a form of liquid which contains nano sized tio2. This liquid is applied onto all surfaces in the interiors of a building. This includes all ceilings, walls, floors and even all the furnitures and fittings within a building. When all these mentioned surfaces are applied with nanoyo, when there is like at presence, the treated surfaces will begin to have an ability to decompose anything that is organic upon contact. Therefore, it is able to oxidize VOCs, molds, odor, bacteria and viruses through a process call photocatalyst reaction.
The purpose of covering all the surfaces in the environment is to make use of every treated surfaces to work against all these harmful microbes. Nano tio2, when applied, can last a long time. It’s lifespan can be as long as 2 to 3 years without any maintenance like plugging it into your power supplies or even changing filters like air purifiers. The invisible coat, when applied onto surfaces, will never change the finishing of the surfaces.

So now, we have another option to consider when we are looking for something to solve our IAQ problem. Nanoyo has been in Malaysia for more than 7 years, applied to many premises such as hospitals, hotels, offices, residentials, karaokes, f&b outlets and etc, helping to solved different problems faced by the patrons here.
To find out more, please visit nanoyo or email us on heng@nanoyo.com.my.

like what you are reading? Click like on ourFacebook for live updates

Arc Flash Corporation’s Latest Product – GermsAway Light

20110707-115342.jpg

Just recently, we have ventured into a new range of product for our company, GermsAway Light. This is no ordinary light tube. This fluorescent light tube is a smart tube that has the ability to eliminate bacteria, eliminate air fungus/molds in the environment and also eliminates odor and harmful VOCs in the areas where its being installed.
It is most economical way to use when we are thinking of improving indoor air quality. GermsAway can be used in hospitals, hotels, offices, residential and many other buildings with minor bad air quality problem. Places with serious indoor air quality problems are advised to apply our nano tio2. More information can be found in our website at http://www.nanoyo.com.my

Here is a test report showing its effectiveness and contribution in reducing the bacteria and fungus/molds in the air

20110707-115816.jpg

GermsAway Light will be available through UE United Sdn Bhd soon. The company’s nature of business is in the distribution of high-tech lightings on the shelves as well as for projects. We believe that together, Arc FLash and UE United will gain great success through the synergy.

20110707-120548.jpg

Need to know more? Contact us.. our contacts are easily accessible through our websites.

like what you are reading? Click like on ourFacebook for live updates

How can Arc Flash Corporation’s nanoyo be used as a prevention to IAQ problems?

There has been researches mentioned that nowadays, even the air inside our buildings is worse that the air outside. This is mainly due to the finishes that we have using on our walls and ceilings (eg, paints and glues used on wall papers), floors (eg, materials used on our carpets), open spaces (eg, use of fragrances), washing materials (fragrances detergents) and etc. All the mentioned materials emits VOCs. Most of these VOCs contains harmful gasses that is dangerous to human Heath over a long time.
These danger can’t be seen and felt. The only way we can detect is either by smelling or using VOC testers.

Besides VOCs, even other micro-organic matters like bacteria, virus, molds/fungus and other allergens that we can’t see will harm our health over time. How can we know whether or not our home of offices or even our cars are filled with all these harmful microbes? They cannot be seen and felt as well. Again, there are numerous swap test equipments and expertise our there who is able to detect them.

So, what do we do after detection of such harmful matters that we have been living with? We take actions by trying to eliminate them. There are a lot of products that have the ability to minimize such contaminants, but does anyone really know what to use? Do they depend on a physical product like an air purifier? After determining that, do they go for the brands and then comparing prices? When they purchase these products to counter the IAQ problems, do they even check the air quality and cleanness of their surfaces once a while to make sure what they have purchased is useful? If they don’t, what makes them trust the products they are using? What different does that make to using nanoyo?

Nanoyo is a form of liquid which contains nano sized tio2. This liquid is applied onto all surfaces in the interiors of a building. This includes all ceilings, walls, floors and even all the furnitures and fittings within a building. When all these mentioned surfaces are applied with nanoyo, when there is like at presence, the treated surfaces will begin to have an ability to decompose anything that is organic upon contact. Therefore, it is able to oxidize VOCs, molds, odor, bacteria and viruses through a process call photocatalyst reaction.
The purpose of covering all the surfaces in the environment is to make use of every treated surfaces to work against all these harmful microbes. Nano tio2, when applied, can last a long time. It’s lifespan can be as long as 2 to 3 years without any maintenance like plugging it into your power supplies or even changing filters like air purifiers. The invisible coat, when applied onto surfaces, will never change the finishing of the surfaces.

So now, we have another option to consider when we are looking for something to solve our IAQ problem. Nanoyo has been in Malaysia for more than 7 years, applied to many premises such as hospitals, hotels, offices, residentials, karaokes, f&b outlets and etc, helping to solved different problems faced by the patrons here.
To find out more, please visit nanoyo or email us on heng@nanoyo.com.my.

like what you are reading? Click like on ourFacebook for live updates